Industrial Floor Systems | Floor and Wall Coating Systems | Decorative Floor Systems
INDUSTRIAL FLOOR SYSTEMS
Industrial Epoxy Topping
C.A. Reed Industrial Epoxy Topping is a trowel-applied flooring system consisting of 100% solids epoxy resin and selected aggregates providing heavy-duty protection at 3/16"-1/4" (up to any) thickness.
- Designed for heavy-duty industrial use
- High impact, wear and thermal shock resistance
- Solution for resurfacing damaged or spalled floors
Epoxy Broadcast System
C.A. Reed Epoxy Broadcast System is a durable flooring system consisting of 100% solids pigmented epoxy resin and selected aggregates. Available in a “double broadcast” at 1/8" thickness or a “single broadcast” at 1/16" thickness.
- Designed for moderate-duty industrial use
- Good impact, wear and chemical resistance
Epoxy Slurry System
C.A. Reed Epoxy Slurry System consists of pigmented 100% solids epoxy resin and silica fillers installed in a slurry consistency over a primer at 1/16" thickness.
- Designed for light to moderate duty industrial use
- Good impact, wear and chemical resistance
Mechanical Room System
C.A. Reed Mechanical Room System is a fluid-applied, resinous flooring system designed for areas requiring waterproofing protection. Recommended thickness is 1/8".
- Flexible properties resist movement and vibration while providing a waterproof surface
- Good impact, wear and chemical resistance
Industrial Novolac Topping
C.A. Reed Industrial Novolac Topping utilizes C.A. Reed's Epoxy Novolac resins in a heavy-duty trowelled industrial topping.
- Designed especially for severe chemical exposures and secondary containment applications
- Protects the substrate and the environment from extreme chemical exposure in many applications
FLOOR AND WALL COATING SYSTEMS
Epoxy Coating Systems
C.A. Reed Epoxy Coating Systems are available in a variety of thicknesses. (20 to 30 mil typical) and consist of 100% solids epoxy.
- Suitable for light-duty environments
- Glossy, easy-to-maintain surface resists dirt and chemical penetration while enhancing the appearance and light reflectivity of your facility
- Available in a variety of colors and textures
Clear Epoxy Sealer System
C.A. Reed Clear Epoxy Sealer System is an economical 12-16 mil thick floor sealer system consisting of clear 100% solids epoxy.
- Economical solution for dusting, staining and dirt penetration into concrete floors
- No solvent odors and can be applied in occupied facilities
Epoxy Wall Coating System
C.A. Reed Epoxy Wall Coating System is a 100% solids epoxy system designed for areas requiring a high build protective coating.
- Ideal for industrial food, chemical and pharmaceutical processing areas
- Provides high impact and chemical resistance
- Combine with a C.A. Reed Epoxy Floor System to provide a seamless wall-to-floor surface that is easy to maintain
DECORATIVE FLOOR SYSTEMS
Decorative Quartz System
C.A. Reed Decorative Quartz Floor is an attractive seamless floor system consisting of clear 100% solids epoxy resin and colored quartz aggregateinstalled in a “double broadcast” at 1/8" thickness.
- Designed for moderate-duty industrial use where a decorative appearance is desired
- Finished with a clear coat of 100% solids epoxy to yield a skid-inhibiting texture
- Additional topcoats can be applied for smoother finishes
Decorative Flake System
C. A. Reed Decorative Flake System is an attractive, seamless flooring system consisting of 100% solids epoxy resin and colored vinyl flakes installed at 1/16" (thicker applications are available.)
- Designed for light to moderate duty environments
- Easy to clean, decorative finish
- Finished with two clear coats of 100% solids epoxy to yield a subtle ‘orange peel’ type texture
All systems are available in a variety of colors and textures. An integral cove base can be installed in areas requiring a seamless floor to wall transition.
Contact C. A. Reed for complete technical data and recommendation regarding your specific application.
