Industrial Floors

Industrial Epoxy Topping

C.A. Reed Industrial Epoxy Topping is a trowel-applied flooring system consisting of 100% solids epoxy resin and selected aggregates providing heavy-duty protection at 3/16"-1/4" (up to any) thickness.


  • Designed for heavy-duty industrial use
  • High impact, wear and thermal shock resistance
  • Solution for resurfacing damaged or spalled floors

Urecrete (Urethane Cement Flooring)

URECRETE is a seamless, urethane-modified, cementitious system that produces a dense, heavy-duty flooring system with excellent chemical and thermal shock resistance. Available in SL (self-leveling) and TD (trowel-down) formulations for installed thickness of 3/16" - 1/4".


  • Thermal shock resistant (up to 250ºF, higher for intermittent spills)
  • Available in a one-step application or can be complimented by a variety of topcoats
  • Moisture vapor tolerant, may be installed on 7-10 day old concrete
  • Meets USDA, FDA and OSHA standards
  • Rapid installation and rapid cure means rapid return to service

Epoxy Broadcast System

C.A. Reed Epoxy Broadcast System is a durable flooring system consisting of 100% solids pigmented epoxy resin and selected aggregates. Available in a “double broadcast” at 1/8" thickness or a “single broadcast” at 1/16" thickness.


  • Designed for moderate-duty industrial use
  • Good impact, wear and chemical resistance

Epoxy Slurry System

C.A. Reed Epoxy Slurry System consists of pigmented 100% solids epoxy resin and silica fillers installed in a slurry consistency over a primer at 1/16" thickness.


  • Designed for light to moderate duty industrial use
  • Good impact, wear and chemical resistance

Mechanical Room System

C.A. Reed Mechanical Room System is a fluid-applied, resinous flooring system designed for areas requiring waterproofing protection. Recommended thickness is 1/8".


  • Flexible properties resist movement and vibration while providing a waterproof surface
  • Good impact, wear and chemical resistance

Industrial Novolac Topping

C.A. Reed Industrial Novolac Topping utilizes C.A. Reed's Epoxy Novolac resins in a heavy-duty trowelled industrial topping.


  • Designed especially for severe chemical exposures and secondary containment applications
  • Protects the substrate and the environment from extreme chemical exposure in many applications


All systems are available in a variety of colors and textures. An integral cove base can be installed in areas requiring a seamless floor to wall transition.


Contact C. A. Reed for complete technical data and recommendation regarding your specific application.

 
See our Color Selection Guide.